Sawdust Catcher Solves Dovetail Clamping Issues
A unique clamping block design addresses the challenges of clamping dovetail joints, particularly when they protrude.
A new solution has been proposed for the challenges of clamping dovetail joints, particularly when they protrude.
The issue arises when dovetail joints are designed to protrude slightly, making it difficult to apply clamping pressure directly over the joint. This can be a problem when using traditional clamping methods.
A unique clamping block design has been suggested to solve this problem. The block can be made using a bandsaw or a dado blade on a tablesaw, and its feet should be spaced and sized to fit between the pins of the joint.
To assemble the box, the clamping blocks are tapped into place and held in position with masking tape while the clamps are added. The box is then checked for squareness and allowed to dry.
## Making the Clamping Block
The clamping block can be made using a bandsaw or a dado blade on a tablesaw. The feet of the block should be spaced and sized to fit between the pins of the joint.
## Assembling the Box
To assemble the box, the clamping blocks are tapped into place and held in position with masking tape while the clamps are added. The box is then checked for squareness and allowed to dry.
The proposed solution addresses the challenges of clamping dovetail joints, particularly when they protrude. By using a unique clamping block design, woodworkers can apply clamping pressure directly over the joint, ensuring a strong and self-locking joint.
