Joint and Grain
Live
Construction

Paul Sellers on Woodworking's Daily Challenges

Woodworker Paul Sellers reflects on the craft's personal rewards and practical hurdles, while maker Owain Harris details the construction of a versatile shop cart with a dead-flat torsion box top.

Woodworker Paul Sellers reflects on the craft's personal rewards and practical hurdles, while maker Owain Harris details...

This week brings a personal reflection from a master woodworker on the nature of the craft and a detailed account of a custom shop fixture built for precision. One story is an introspective look at daily workshop life, and the other is a focused build guide for a functional piece of shop furniture.

A Woodworker's Perspective

Paul Sellers, a prominent woodworking instructor, recently recounted the mix of recognition and routine challenges that define his craft. He described a successful filming session for a new series, followed immediately by a frustrating encounter with a piece of mesquite on his bandsaw. The exceptionally hard and dense wood, which is twice as hard as oak, caused unexpected blade drift despite the machine being only six months old. Sellers attributed the problem to the wood's ultra-high silica content, which can dull tool edges almost instantly.

He explained that such setbacks are a normal part of the craft. Sellers did not get angry but instead viewed the incident as a typical, character-building challenge. He set the mesquite aside for later use, noting he has ample supply for future projects, and returned to work on another task. The experience led him to reflect on woodworking as a source of peace and deep contemplation, especially in troubling times. For Sellers, the craft is defined by its promise and the good it delivers, far outweighing occasional disappointments. He concluded by emphasizing a pragmatic approach to problem-solving, which sometimes means walking away from a difficult piece of wood or task temporarily.

Building a Veneering Cart

Furniture maker Owain Harris constructed a specialized rolling cart to simplify his veneering work and general shop tasks. The cart's standout feature is its dead-flat torsion box top, which Harris deemed essential for ensuring veneered panels cure without distortion. He built the cart to provide organized storage for his vacuum pump and accessories, moving on from a makeshift solution that led to frequent spills and clutter.

Harris used construction-grade lumber for the cart's frame, specifically selecting premium-grade 2x4s from a big-box store. He milled these pieces on a jointer and planer to ensure they were flat and straight. For the torsion box and other parts, he chose 3/4-inch radiata pine plywood, finding it both affordable and reliably flat. The final design includes an open cubby for the vacuum pump and dedicated drawers for veneering supplies. Harris, who builds custom furniture in New Hampshire and teaches in Maine, now uses the cart not only for veneering but also for assembly and moving finished pieces, making it a daily fixture in his workshop.

Related coverage

More from Construction